pricessetr.blogg.se - Does seagate have seatools for mac

#Does seagate have seatools for mac serial number
#Does seagate have seatools for mac .exe
#Does seagate have seatools for mac serial
#Does seagate have seatools for mac full
#Does seagate have seatools for mac license

Green text: DST (Drive Self Test) support status - If DST is supported it will be used during testing.īlue text: Operating temperature status - Current and Max registered temp - useful in determining if heat is a factor in drive trouble or drive failure. If SMART has been tripped, then there is no need to run a test.

#Does seagate have seatools for mac serial

White text: The device (ie, Device 0) and its model and serial numbers.Īqua text: Whether the motherboard supports 48-bit logical block addressing, and the maximum LBA for this drive along with its capacity. The explanation for the multi-colored text near the bottom follows:

V - View log file - Pulls up the log file for review.

Also used for drives that get clipped to a lower capacity.

C - Set Capacity - Used to set drive capacity to surpass the common 32GB and 137GB limits.

A - Spin down drive (for Acoustic test) - Spins the drive down so you can determine if noise in a system is caused by the drive or by something else.

It will erase ALL partitions and data on the drive. Good for erasing corrupted or unusual partitions.

Z - Zero Fill - Wipes out the data on the drive.

Usually used to find and repair bad sectors.

#Does seagate have seatools for mac full

L - Long test - Full scan of the drive.(If DST is not supported, Seatools runs a read test). S - Short test - Runs a Drive Self-Test (DST) test against Seagate drives.D or 0-9 - Switches drives - Select which drive to perform actions on (see device area for correlating number).See here the varying elements of the old version's testing screen.

#Does seagate have seatools for mac license

Once you agree to the license terms the testing screen will appear. Use the Page Up and Page Down keys to scroll. Read the agreement and press Y to accept the terms and continue to the testing or press N to exit the program. Once you have booted into SeaTools a license agreement will appear. Click View log to open the log file once the test is complete (won't show much more than what is on the screen).

POH - Power on hours displayed and Drive temperature in Celsius.

Drive status and supported features displayed.

#Does seagate have seatools for mac serial number

Model number and Serial number for drive selected.

īelow is the Results and Progress screen: It can be used to recover bad sectors and erases all data.

Full Erase - Fills the entire drive with zeros.

Timed Erase (10 second, 20 seconds, 1 minute, 5 minutes) - Handy for when quick zerofill just doesn't get it all (ie, in case of boot loaders, etc).

This option requires one second to complete.

Erase Track Zero - Quick Zero fill to erase the data and partitions from a drive.

Set Capacity to MAX - Used to resize drive to full capacity (does not bypass the Limit Capacity Jumper).

Set Capacity manually - Limits drive to a specific number of Logical Block Addresses (LBAs), useful when replacing an unusual drive size in a RAID.

Set Capacity to 32GB - Limits drive to 32GB for use on Pentium 3 or older systems.

Acoustic test - Spins the drive down so you can determine if noise in a system is caused by the drive or by something else.

This is usually used to find and repair bad sectors.

Long test - Runs a full scan of the drive.

If DST is not supported by the drive, Seatools runs a read test.

Short test - Runs a DST test against Seagate drives.

This will take you to the main menu page.

There are three different ways to use SeaTools for DOS:Īt bootup, you will see an End User License Agreement: Please use SeaTools for Windows to test external drives. This utility will not detect external drives. See Document ID: 184971 or the user guide for your computer for information on changing boot sequence. If it doesn't boot from the media the boot order may need to be adjusted in the computer BIOS.

Once the bootable media has been created then boot the computer with the media in the drive. Just copying the files to a CD will not work the file must be burned as an image to the CD. View Document ID: 201431 for details on burning the.

#Does seagate have seatools for mac .exe

EXE file downloaded from the Seagate web site and follow the on-screen instructions.Ĭreating a CD using the bootable CD image. In order to use SeaTools for DOS choose to download the floppy diskette version or the bootable CD image version.įor the floppy diskette version you will need one 1.44MB floppy diskette. This is the walk-through for both the old (text) and new (GUI) version. It includes several tests that will examine the physical media on your Seagate or Maxtor disk drive and any non-Seagate disk drive. SeaTools for DOS is a comprehensive, easy-to-use diagnostic tool that helps you quickly determine what is preventing you from accessing data on your desktop or notebook computer.